Thanks and I'm in France. How to debug in this situation?

@wghirakawa Related to a different question (https://forum.pycom.io/topic/4118/gpy-or-fipy-using-lte-in-the-us), could I please ask you to check the result of 'AT+SQNHPLMN?'. I am trying to find out if Sequans supports 6-digit PLMNs in the US.

@bqpd Thank you from the future.

@dan Any updates on this issue? Seems like their hasn't been much change in the documentation.

To anyone using the Bell Canada LTE Cat M1 network: just got word from them and it seems that at this point there is PSM support but: "eDRX feature is under consideration for future availability but there is no announced plan yet". I'll be playing with the +CPSMS AT command to see what's possible.

@reidfo Sure looks like it. Change line 294, see if you get a different behavior. http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html#_Toc385349238 https://github.com/pycom/pycom-micropython-sigfox/blob/f517b1df5083ddc158c075852d7f2497480b0d84/esp32/frozen/Common/MQTTClient.py#L294

Also wanting to know more about the function of the CID.

@averri Telegeography is usually good at publishing info when countries get coverage, but the only NB- IoT / LTE-M1 news they have for Ireland is https://www.telegeography.com/products/commsupdate/articles/2017/09/07/iot-time-m2minternet-of-things-weekly-digest/

Hi @sh4nnongoh, Please check this post for updates about the modem upgrades. Hope this helps!

@hammerfet have you had success at this lately? Just getting started with lte and will try telenor and telia.

@paddy Any new info on this topic? I cannot get my FiPy to keep uploading for more than a few hours - sometimes 20 minutes - without returning endless EAGAIN or EHOSTUNREACH errors on HTTP calls. This a huge problem for my remote weather station design. I am going to have to have a fully parallel Raspberry Pi zero to run reliably 24/7 and sample the sensors (defeating low power requirement), since I currently have to shut down and reboot my FiPy in code everytime I start getting the HTTP request errors. American Verizon Wireless SIM card through Nimbelink and updated Sequans firmware. Dear Pycom: I want to love your product. Please help.

@micksta 15 Oct 2018 - Ran this code on Telstra SIM (Adelaide) using AT+CGDCONT=1,"IP","telstra.internet